BTS-100S
Bluetooth GPS Camera Reminder and Photo Logger
General Description
BTS-100S Bluetooth GPS receiver, a total solution of GPS Bluetooth wireless technology, is dedicated design for the user who is usually carry the portable device such as PDAs/smart phones all the time. BTS-100S allows 17 hours continuous use with a single battery charge. BTS-100S uses GPS technology to provide accurate warnings to fixed and mobile speed cameras in the road ahead. The unit also including some nice features, such as vibration sensor for power management and POI update, which are the unique benefits to the users.
Not only transmit satellite information to the PDA or smart phone via Bluetooth but also become a G-Mouse GPS receiver through a data cable to deliver satellite information to the device without Bluetooth interface.
Applications
Automotive
Asset tracking
Personal/Portable Navigation (PDA, Pocket PC etc.)
Location Based Services enabled devices
Sports and Recreation
Key Products Features
20 channels "All-In-View" tracking
Cold/Warm/Hot start time: 42/38/1 sec. (average)
Superior sensitivity: -159dBm tracking
Reacquisition time: 0.1 sec
Built-in rechargeable Li-ion battery
Support standard NMEA-0183 at 38400 bps baud rate
Compatible with Bluetooth devices with Serial Port Profile (SPP)
Support G-mouse function via USB cable
Voice alarm and LED indicator for speeding alert
Volume adjustable
POI (Point of Interest) input and output via USB port; easy to add/erase POI by two buttons
Vibration sensor for power management (auto power on or goes to sleep mode)
Low power consumption: 17 hours continuous use by 1100mAh battery
Time to full recharge: within 3 hours
Size: 77.4 (L) X 46.3 (W) X 23.2 (H) mm
Weight: 56.5g (battery included)
Specifications
GPS Features
|
Chipset |
SiRF Star III |
Frequency |
L1, 1575.42MHz |
C/A Code |
1.023MHz chip rate |
Channels |
Supports 20 channels |
Antenna (Internal) |
Built-in low noise patch antenna
External MMCX antenna port |
Sensitivity |
To ¡V 159dBm Tracking, Superior Urban Canyon Performance |
Time to First Fix (TTFF) |
Cold Start |
42 sec, average |
Warm Start |
38 sec, average |
Hot Start |
1 sec, average |
Reacquisition |
0.1 sec |
Update Rate |
1 Hz (max.) |
Accuracy |
Position |
5 ¡V 25m CEP without SA |
Velocity |
0.1m/sec, without SA |
Time |
1µs synchronized to GPS time |
Power |
Built-in rechargeable 1100mAh Li-ion battery and 5V DC input |
Operation |
65mA (Typical) |
Operation Time |
17hrs, fully charged, in continuous mode |
Sleeping Mode |
Sustain more than 2000 hours |
Charging Time |
3.0hrs. (Typical) |
Environmental Characteristics |
Operating Temperature |
- 20°C to + 60°C |
Storage Temperature |
- 20°C to + 85°C |
Datum |
WGS-84 |
Dynamic Conditions |
Altitude |
<18,000 m (60,000feet) |
Velocity |
<515 m/s (1000 knots) |
Acceleration |
<4G |
Motional Jerk |
20m/sec³ max |
Interface |
Communication Protocol: Communicate with host platform via Bluetooth (class 2) serial port profile |
Bluetooth communication distance 10meters (Typical) |
GPS Protocol: Default: NMEA-0183 - GGA, GSA, GSV, |
RMC |
Data bit: 8, stop bit: 1(Default) |
Device Size and Weight |
77.4 (L) X 46.3 (W) X 23.2 (H) mm |
3.05 (L) X 1.82 (W) X 0.90 (H) inch |
56.5g (battery included) |
Accessories |
Car charger (12V in, 5V output) |
AC adaptor (5.3V output, 500mA) |
Camera Detector |
|
Number of POI: factory default 180,000; my favorite point: 256 |
Goes to sleep mode if vehicle stays still for 15 minutes |
Auto power on in 3 sec. when detecting vibration |
Speaker: 1 watt/ 8 ohm |
|
|